TC3006 "MAXI" Gigabit Fiber Optic Mode Converter/Repeater - Fiber Optic Modems, Multiplexers, Multidrop (SCADA) Modem, RS-232, RS-422, RS-485,V.35, T1/E1, T3/E3, Intercom/Voice, Ethernet, Gigabit Ethernet..

Features

Application

Description

Technical
Specifications

Size and
Dimensions

Information
Request
Form

Data Rates up to 1000Mbps
Single Mode (1300/1550nm)
Multimode (850nm)
Repeats Multimode and Single Mode Signals
Two-way Communication on One Fiber (optional, single mode only)
Distances up to 100km
Local Dry Contact Alarm Relay
8 Diagnostic LED Indicators
Built-In Redundant Power Supply
Standalone or Rackmount (Interchangeable)

Talk to a sales engineer on this product/application.

Data Sheets: 2 pages (62 Kb)

TC3006S Standalone Unit

3 X TC3006R (Housed in TCRM192)

(Click on image to enlarge)

Applications

The MAXI Mode Converter is used to convert multimode to single mode, or vice versa, in a variety of LAN environments including Gigabit Ethernet Switches and Routers. This conversion is done to cross-connect different fiber types, regenerate optical signals and/or extend transmission distances. It can also be used to repeat a Gigabit signal on multimode or single mode fibers.

Top

Description

The TC3006 “MAXI” Gigabit Ethernet Multimode-to-Single Mode Fiber Optic Converter converts multimode formats to single mode formats, or vice versa, for Gigabit data transmission. It also repeats the multimode & single mode fiber signals. Transmission distances to more than 100km are possible with the Laser 1550nm option (34dB loss budget).

The MAXI will convert or repeat all popular wavelengths 850/1300nm Multimode or 1300/1550nm Single Mode. It is compatible with Gigabit Ethernet standards 1000Base-SX and 1000Base-LX.

The MAXI provides users with several key features including Local & Remote Loopback, Dry Contact Relay Alarm, Audible Alarm Buzzer, Power Redundancy, and standalone or rackmount modularity.

The Dry Contact Alarm is particularly beneficial. Along with an audible alarm buzzer, it identifies Optical Signal Loss on either the multimode or single mode ends.

Power redundancy is load sharing and switches over automatically in the event of a failure. Power can be either 12VDC (standard), 24VDC, -48VDC, 125VDC or 115/230VAC with an external power cube. Standalone versions are modular, i.e. used either in a standalone case or in a rackmount assembly. Standard connectors are ST, SC or FC type.

Four DIP switches and eight LED indicators are provided to help installation and troubleshooting. A hardened temperature version (-20o to 70oC), Model TC3006T, is also available.

Top

Technical Specifications

Data Rates
Up to 1000 Mbps
Optical
Transmitter	ELED, LASER*
Receiver	PIN Diode
Wavelength	850nm Multimode 1300nm, 1550nm Single Mode
Fiber Optic Connectors	ST, FC or SC
Loss Budgets*
ELED	Multimode @ 850nm: 16dB
LASER (L1)	Single Mode @ 1300nm: 20dB
LASER (L2)	Single Mode @ 1300nm: 25dB
High Power LASER	Single Mode @ 1300/1550nm: 34dB
System
Bit Error Rate	1 in 10¹⁰ or better
* Contact factory for higher requirements

Visual Indicators
System	PWR A, PWR B, VccA, VccB
Optical Signal Status	MM RX, MM TX, SM RX, SM TX
Alarm
Dry Contact	Normal Open
Power
Standard	12VDC @ 700mA (max)
Optional	24VDC, -48VDC, or 115/230VAC (with external power cube)
Temperature
Operating	-10° to 50°C
Hi-Temp (optional)	-20° to 70°C
Storage	-40° to 90°C
Humidity	95% non-condensing
Physical (Standalone/Wallmount Unit) (Details)
Height	(3.53 cm) 1.39"
Width	(18.13 cm) 7.14"
Depth	(24.89 cm) 9.80"
Weight	(512 gm) 1.5 lbs.

Information Request Form

Select the items that apply, and then let us know how to contact you.

Send product literature Model:
Have a salesperson contact me

      Name: 
     Title: 
   Company: 
   Address: 
    E-mail: 
     Phone: 
       FAX:

  Comments:

I Initially heard of TC Communications from:

Google.com
Yahoo.com
MSN.com
AOL.com
Referral
Magazine

Other

Top