Ethernet Network Backbone > Available JumboSwitch Modular Cards
Quick Product Search:
Available JumboSwitch Modular Cards
Because of its flexibility and multiservice capability, the JumboSwitch is ideal for a variety of important Ethernet backbone and sub-network configurations including:
- Primary communications network. The JumboSwitch’s current selection of 15 different interface cards offers the immediate benefit of migrating legacy applications over to IP and consolidating company-wide applications on a single gigabit Ethernet platform.
- Hybrid Ethernet/SONET network. Enables entities to choose between Ethernet & SONET for current and future applications.
- MPLS sub-network. Much easier on a budget than MPLS, multiservice Ethernet can be used to complement MPLS networks.
-
This Industrial Ethernet Switch is a compact, efficient
solution that can operate from -40ºC to 80ºC and has integrated Serial Server.
-
Compact and simple to configure, the TC3847-1 Serial Server transports four channels of RS-232 or RS-422/RS-485 data over existing Layer 2/Layer 3 networks.
-
Featuring support for teleprotection relays, the TC3847-3 Turbo Serial Card transports four channels of RS-232 or RS-422/ RS-485 serial data over existing Layer 2/Layer 3 networks.
-
This 6-Port gigabit card is a copper, Ethernet switch that allows you to control Security Network Configurations, Rate Limiting, VLAN and QOS.
-
The TC3842 is a 6-Port SFP Gigabit Ethernet Switch. It is compatible with both SFP optical and copper modules and supports 850nm multimode and 1300/1550 single mode.
-
The C37.94-over-IP Card Featuring extends two C37.94 circuits over Ethernet/IP networks and has extremely low latency.
-
This Analog + Dry Contact IP Gateway links or extends 4 channels of 600Ω 2/4 wire analog and 4 channels of dry contacts across Layer 2/3 Ethernet networks.
-
The TC3847-5 is ideal for situations where a user needs to extend dry
contacts across existing Layer 2/Layer 3 networks and low latency
is important.
-
JumboSwitch offers a Ethernet-over-T1/E1 card that allows for Statistics Monitoring, Network Time Protocol, Remote Firmware Upgrade and Temperature & Power Monitoring.
-
This Ethernet-over-T3/E3 card is a ruggedized gateway for transporting Ethernet over TDM circuits.
-
The G.703/64K-over-IP Gateway Card achieves less than 5 msec. latency by adaptive clock recovery, buffering and forwarding technology.
-
This Modem Over IP is compatible with CCITT and Bell data modem standards. It is easy to configure and offers extremely low latency.
-
This T1/E1 over IP Gateway transports up to 4 channels of T1 and/or E1 over Layer 2/3 Ethernet networks with low latency.
-
This T3/E3 over IP Gateway transports a single T3 or E3 circut over Layer 2/3 Ethernet networks with low latency.
-
The TC3848 VoIP Virtual PBX merges a self-contained phone system, Ethernet simplicity and the call processing features of PBXs.
-
The TC3847-6 is a dry contact closure monitoring interface card for
the JumboSwitch (TC3840) product family. It works with the TCView
network management system to display remote closure status at
the central TCView server site.