T1 / E1 & Data Multiplexer w/Ethernet Bridge - TC8510

Quick Product Search: 
TC8510
T1 / E1 & 10/100 Ethernet Fiber Optic Multiplexer (1-4 Ch.)

The TC8510 Fiber Optic Multiplexer multiplexes combinations of T1/E1, 10/100M Ethernet & Serial Data over single mode or multimode fiber optic cable.

The Ethernet port supports full 10Mbps bandwidth & rate control in increments of 32Kbps. Each T1 or E1 channel is independent, transparent to the framing format & supports all applicable standards & line codes. Serial interface options are RS-232, RS-422, RS-449 & RS-530.

As expected from a high-end T1/E1 & Ethernet Mux, it supports features such as distances to more than 100 km, a “bi-directional 1-fiber” option to maximize fiber usage & optional redundant power & optics, including automatic switchover.

Setup, diagnostics and control is accessed via Serial Terminal, Telnet or SNMP management ports. Diagnostics include LED indicators, dry contact alarms & local & remote loopback.

Features
  • Multiplexes 1 - 4 Ch. T1/E1 and 10/100 Ethernet, Optional RS-232, RS-530
  • Network Management (Web, Telnet,SNMP)
  • Ethernet Rate Control
  • One Fiber Bi-Directional FiberOptic Option
  • Multimode or Single Mode (1300/1550nm)
  • Power Redundancy, Optical Redundancy Optional
  • 12VDC, Optional 24VDC, -48VDC, 125VDC or 115/230VAC
  • Industrial Hardened (optional)
  • Hi-Temp2 Version Exceeds NEMA & Caltrans Traffic Control Specs
Similar Products

  1. Packaging Options:
  2. Standalone Unit: SD 10
  3. Rackmount Card: 1U Long Rack (#195)
  4. Rackmount Card: 4U Long Rack (#191)


Applications

Typical applications include extending SDH/SONET backbones and adding Ethernet service to existing T1 or E1 fiber optic links. Service Providers use the TC8510 as an efficient, cost effective method to provide their customers with Ethernet including Rate Control) connections for data and T1 for voice. The one fiber bi-directional option can double usage of existing fiber optic cable plants.

TC8510 - T1/E1 Multiplexer w/ Ethernet Bridge
Click to enlarge

Specifications

Data Rates
  1. T14 Ports
  2. E12.048 Mbps
  3. Ethernet10/100 Mbps (10 Mbps throughput)
  4. RS-232Up to 128 Kbps Async, 64 Kbps Sync
  5. RS-422.Up to 1Mbps
Channel Capacity
  1. T1, E1 or Combo4
  2. Ethernet1
  3. RS-232, RS-4224
Optical
  1. TransmitterELED/LASER*
  2. ReceiverPIN Diode
  3. Wavelength1300nm Multimode & 1300/1550nm Single Mode
  4. Optical ConnectorsST , FC, SC
  5. Loss Budgets *
  6. LED/ELED 15dB MM @62.5/125mm
  7. Laser 20dB SM @9/125mm
Electrical
  1. InterfaceT1, E1 (G.703), IEEE 802.3, RS-232, RS-422
  2. T1 ConnectorsTerminal Blocks
  3. E1 ConnectorsTerminal Blocks
  4. 10/100 Ethernet ConnectorsRJ45F
  5. RS-232, RS-422RJ45F
System
  1. Bit Error Rate1 in 1010 or Better
  2. T1 ConnectorsTerminal Blocks
  3. E1 ConnectorsTerminal Blocks
  4. 10/100 Ethernet ConnectorsRJ45F
  5. RS-232, RS-422RJ45F
Visual Indicators
  1. System LEDsPWR A, PWR B, Vcc
  2. Channel Status (each port)RXD,RLOS, LOS, RLPB, BPV, Alarm
  3. Optical Signal StatusSyncB Optic in Use, RXA, RXB, VLIN
Diagnostic Functions
  1. Local and Remote Loopback
Power
  1. Standard12VDC @ 1.2A
  2. Optional24VDC, -48VDC, 125VDC, 115/230VAC
Temperature
  1. Operating-10°C to 50°C
  2. Hi-Temp1 (option)-20°C to 70°C
  3. Hi-Temp2 (option)-40°C to 80°C
  4. Storage-40°C to 90°C
  5. Humidity95% non-condensing
Physical (Standalone Unit)
  1. Height(6.70 cm) 2.6"
  2. Width(18.14 cm) 7.1"
  3. Depth(124.8 cm) 9.8"
  4. Weight(1.36 kg) 3.0 lbs
* Contact factory for higher requirements

Back to top